Stands

We can supply Atacama stands and accessories. As the range is vast so please call with your requirements for a quotation. Excellent prices for self install.

They have modular designs with supports of damped glass and their new bamboo shelves. Both available with painted steel or wooden legs The bamboo based shelves have natural self damping properties and make a contribution to improved sound. The finishes are natural, light oak stain or dark oak stain. They come in either 3 or 4 leg support modules.

Atacama website >>

Evoque ECO stand

The simple, elegant GEM Separates stand system offer a good solution for many domestic situations. Their laminated glass (Acoustilam) and the damped steel legs result is a very good sound at affordable prices. The standard module is 600 x 400 mm but custom sizes are made to order. For example 650 x 400 mm or 700 x 500 mm can offer greater flexibility at a modest price premium. There are a variety of painted glass and coloured steel support option to suit every combination or decorative taste. Please phone with your requirements for a quotation. Excellent prices for self install.

Futureglass website >>

GEM separates and medi storage roomset

This manufacturer makes the best equipment supports for high quality audio that we have heard. Based on their experiences in the military and aerospace industry, the total control of resonance and eliminating unwanted noise reveals the full potential of the equipment and indeed the music it is reproducing. The highest resolution revealed due to a huge reduction in the noise floor - up to -20dB is feasible

The VXR frame system was launched at the Munich High End Show in May 2016. It is a new modular design, similar to the SXR concept, and infinitely flexible in terms of width and height combinations. It replaces the MXR design as the flagship frame system. The frame is made from billet aircraft grade aluminium to produce a frame system of the maximum stiffness resulting in the lowest level of noise reduction of any equipment support. An industry reference level product thus revealing the true performance of the very best audio electronics available today. 

VXR-1921-1V 1 level frame (amplifier base) £8250
VXR-1921-2V 2 level frame £15395 (8" component spacing)
VXR-1921-2V 2 level frame £16895 (12" component spacing)
VXR-1921-3V 3 level frame £22195 (8" component spacing)
VXR-1921-4V 4 level frame £29000 (8" component spacing)
VXR-1921-5V 5 level frame £35495 (8" component spacing)

Available in Black.

Please note Isolation Bases are ordered separately. The isolation bases recommended for use with the VXR Reference frame would the M3X2 Series for optimal performance. However the S3 Series isolation bases could also be used with a small reduction in performance for secondary components at a lower cost.

M3X2-1921 Isolation Base £3196 each; S3-1921 Isolation base £2446 each. For more detailed information and different size options see below.

There is Solid Brace Insert to support particularly heavy components available at £2796 (1 pair) per frame level.

VXR-1921-4V

The SXR stands system is a simpler design but offering infinite flexibility both in terms of height and width. Additional modules can be added at any time as a retro fit. Again, very much the HRS beneficial effect on sound at a reduced level but at more affordable prices. There are two width options available and modules can go up  5 levels high. The 1 level module is designed as amplifier stand. We have this system in our showrooms for viewing and evaluation. Available in black or silver anodised aluminium.

Examples of popular options:

SXR-1719-2V 2 level frame £4495

SXR-1719-3V 3 level frame £6395
SXR-1719-4V 4 level frame £7995

SXR-1719-5V 5 level frame £10195

SXR-1921-2V 2 level frame £4495

SXR-1921-3V 3 level frame £6395              
SXR-1921-4V 4 level frame £8295

SXR-1921-5V 5 level frame £10395

SXR-1719-1V 1 level (amplifier base) £2595
SXR-1921-1V 1 level (amplifier base) £2695

SXR Double or Triple width options, plus Tiered Systems can be configured. The price is the total of the integrated frame prices shown above. Please call for more detail and a price quotation. 

Isolation bases are to be ordered separately. The usual isolation base recommended for use with the SXR frame is the S3 Series. However the M3X2 Series isolation bases can also be used for enhanced performance and would bring the overall sound improvement closer to that of the VXR frame and bases.

S3-1719 Isolation Base £2245 each; S3-1921 £2395 each. For more detailed information see below.

To improve frame stiffness and load bearing capabilities, there are Solid Brace Inserts available. They can be purchased with the frame or retro fitted at a later date. This again narrows the performance gap between the SXR and MXR frames. £1950 (1 pair) per frame level.

SXR 3 tier equipment support with S1 isolation bases

This new frame system, called the SXRC Series, is a modified SXR design to support and optimise the performance of large audio components. The SXRC series will be available in many different width and depth increments. From widths of 15" to 23", and depths of 21" to 31", this allows HRS to custom fit a support for every amplifier in the world.
 
The SXRC Series Audio Stands is a custom 8 support, twin cross bar frame system with the support structure running front to back. The new frame series can also be expanded vertically to any height to support as many components as desired. Furthermore it can be expanded or contracted vertically at any time after the initial purchase. There are 3 standard support strut heights (6", 8", 10") with an additional 3 custom strut heights (12", 14", 16"). The heights stated indicate the space provided by the strut, not the actual length.

With the trend towards very large and very heavy components, such as those provided by Edge Electronics, Constellation, Boulder, Solution amplifiers, to name but a few, the new frame system allows for the addition and subtraction of HRS Isolator Elements to the M3X bases it supports as needed. This allows HRS to optimize the performance of every amplifier weighing from 1 lb to 500 lbs, and can be available in at least 25 custom size combinations.
 
The SXRC Series will be fitted with custom M3X Isolation Bases that match the frame size (isolation bases are sold separately). The Isolation Bases will be made so that they are adjustable to suit a wide range of amplifier weights. Each custom M3X base will be optimized for the specific amplifier at time of order but owners will be able to have it rebuilt for any other amplifier, if changed in the future, which will fit on existing base.

SXRC Series Frame

The RXR Frame and R-Shelve system is designed to bring the HRS noise reduction characteristics from the VXR and SXR into a more affordable package. Due to the use of wood and a innovative method of adding stiffness, there is a substantial benefit to sound considering the price offered. The shelves are individually adjustable at 30 mm spacings. A very attractive design produces a more domestic friendly appeal and is offered in two finishes: maple and black. 

The new RXR frame system is priced as follows:

RXR-1719-3V 3 level £5696
RXR-1719-4V 4 level £7195               
RXR-1719-5V 5 level £8495

RXR-1719-1V amplifier platform £1950 

RXR-1921-3V 3 level £5695               
RXR-1921-4V 4 level (pictured) £7195
RXR-1921-5V 5 level £8495 

RXR-1921-1V amplifier platform £1950 

RXR-2123-2-1V amplifier platform £2095

Standard finish clear maple; black finish add 10%. All frames are priced without shelves. 

RS Series Shelf - for RXR frames only - black and silver - 1719 and 1921 sizes £550; 2123-2 size £625. 

The R3X isolation base can also be used with the RXR frame system. It has a much better performance than the R Series shelf.

There is new E-1 isolation base now available that brings the entry level for bases down to a more affordable level.  See below for further details on sizes and prices.

Roy Gregory has had a good listen to the RXR frame and R-Shelves and gives his appraisal in his Audio Beat blog. He concludes:

RXR-1921-4V 4 level

HRS has launched a new high performance audio stand which is a minimalist design with infinite modularity allowing it to be expanded vertically and horizontally for future needs. Its unique and revolutionary feature is the enhanced rigidity from an asymmetrically designed frame which adds 40% stiffness to its simple construction.

There is an EXR plinth built in at every level allowing this stand to be used without additional isolation base requirements. This EXR plinth is developed from the E1 isolation base made from a highly compressed composite resin material of great rigidity. Struts are available at 6”, 8”, 10” and 12” lengths and the stands are available in black or silver anodised aluminium.

Additional sonic enhancement can be achieved by lowering the noise floor further by incorporating an Isolation Base, or to use Nimbus Assemblies, Helix, or Vortex products under the component's chassis.

A second unique feature is that the EXR Audio Stand can be upgraded to a SXR Frame with the majority of components reused. All the vertical components can be used and the EXR plinth can be fitted with SF-2, SF-3 or G7 footers to become an EXR Isolation Base.

The EXR Audio Stand was 5 years in development and a principal goal was to bring it in at significantly lower price than the existing RXR frame system, allowing the HRS low noise system to become available to a wider market.

Custom widths and depths are available to order.

HRS have made a video about their new EXR Audio Stand which you can watch below.

EXR-1921-3V with E1 Base on top level

EXR-2V Audio Stand silver

Lateral are a relative newcomer to the equipment supports for quality audio systems, founded in the UK by a passionate engineer, Kevin Hancock with specialist, professional experience of designing vibration affected products. In this short time the company has managed to glean many favourable reviews and, moreover, has won HiFi+ 2019 Accessory of the Year for the LAS-4 Concert rack.

Lateral have a specific design ethos of using structures which are minimal in design, high in strength and stiffness, energy absorbent and damped in all areas. Their audio surfaces use premium wood materials and assembly techniques which connect directly into the structure itself, eliminating any excessive materials which may not improve the sound.

By filtering across the audio frequency spectrum with material selection and structural design, the stands absorb and dissipate the instantaneous audio energy from feedback loops. Decoupling and certain strategic points further reduces the noise floor.

In our listening test we found these equipment supports to produce a well-focused and large soundstage. The addition of the Isolation Platform allows for a more transparent sound and very useful for critical source components such as turntables, CD players/DACs and pre-amplifiers. The presentation is detailed but not overly forward. The sound stage and tonal balance is reminiscent of that achieved the Finite Elemente designed supports which are unfortunately no longer made.

Lateral are both attractive and effective, offering a range of supports for differing requirements and budget.

This is the entry level rack with many of the technologies from the LAS-4 range and was designed for the contemporary home. Shelves are made from black satin finished boards, and black leg tubes. Top surface area is 620 x 420mm, with the lower shelves having a usable width of of 530mm. Maximum component weight 25 kg; bottom shelf 30 kg. 

Various shelf height options available: 120, 160, 220, 280mm.

The design uses differing materials, adhesives and internal geometries to add strength and damping to the audio surface

Available in 2 to 5 tier options. Maximum recommended stand height 1000mm. 

Prices from £425 to £995

LAS9 Cadenz - 3 levels

Shelves are CNC machined premium birch ply composite construction with fine oak veneers and are individually supported. Each shelf has two CNC milled-out crescents to lower resonance and vibration, as well as aiding ventilation. 

Available surface area 540 x 440mm. Outer dimensions 630 x 495mm.

Machined solid oak legs

Split construction isolates upper tiers on 4 & 5 tier stands via spikes

Support lengths of 545mm, 675mm and 810 and 875mm

All LAS-4 models are available with 2 to 5 shelves options

Additional tiers can be added to the 4 and 5 tier stands

Available in natural or black finishes (black at extra cost)

Prices from £425 to £995

LAS-4 Integral

The Flagship LAS-4 support. Available surface area 540 x 440mm. Outer dimensions 630 x 495mm.
 
As with the LA-4 Integral but has a Silver or Black anodised aluminium front panel on the top shelf with minimal open construction for maximum performance and includes a single Concert Isolation Platform on the top level. This Isolation Platform maximises the performance of the component placed on the top level of the rack. The cone contact points consist of ball-bearings and a carbon fibre disc, which can be used together or individually. There is a difference in sound between using the ball bearing or not and hence the over tonal balance can be slightly tuned to taste.

Prices from £1750 to £2700

The Concert Isolation Platform is available separately from £450

LA-4 Concert

This is a larger and wider version of the LAS-4 and offers the same level of performance with similar construction techniques Can be integrated with Concert Isolation Platforms to boost performance.

This is available in various widths and depths. Typically 1140 x 440mm but can extend to 1640 x 550mm – please call for details.

Please note this product has now been deleted

LAS-AV