Network attached player and streamer through professional level high resolution Merging DAC. Includes ROON and Tidal interface. Will support the highest resolution DSD and DXD files. 8 channel output but dedicated to 2 channel stereo.
Distributor's demonstration model use at two audio shows only - no more than 120 hours use. The original design of this superb optical cartridge. A sound that is amongst the finest, if not the finest, vinyl replay on the market today. A very natural sound, unfettered dynamics, super fast transients and excellent timing. A chance to buy this revolutionary cartridge design at an exceptional price. Full warranty applies.
Distributor's demonstration model, approximately 4 years old, very low usage. This is essentially one of the fastest amplifiers in high-end audio due to its high current delivery. Dual mono design. Very natural tonal balance with little artifice or colouration. Extremely linear output across an ultra wide bandwidth. Substantial chassis built with 12.5 mm aircraft grade aluminium. One of the very best sounding amplifiers in the higher end of the audio industry.
Very low usage demonstration unit. The smallest model in the range but uses the same DDD omni drivers as all the other floorstanders. A large, deep sound stage with impressive level of bass from a relatively small cabinet. High degree of focus of images; good stereo from all parts of the room, not just the central listening position - similar to the concert hall experience. The single DDD driver delivers from 24kHz down to the crossover point at 200 Hz with the lower frequencies supplemented via a downward firing 8" driver. One of the best sounding speakers under £15000. The reason for sale is that this acoustic vinyl finish has been discontinued in favour of the high gloss polyester lacquer.
Excellent non suspended turntable includes Clarify tonearm and Virtuoso V2 MM cartridge. Very low usage as a demonstration item - approximately 50-60 hours. Easy installation straight from the carton. Superb sound for the price and would outperform turntables from other brands at twice the price. German engineering with high build quality. Time to refresh this item.
GTX-D NCF Rhodium Double US wall mains sockets; GTX Wall Mounting Plate; 105-D NCF Carbon Fibre Wall Outlet Cover. All in original carton unopened and unused. Cancelled order.
The M3X Isolation Base is intended for use with HRS frames but can be used on the surfaces of other stiff and rigid equipment supports. These Isolation Bases significantly reduce structural borne noise and acoustic feedback loops producing the lowest noise floor with any audio or video component. There are 4 bases available with either RED, GREEN or BLUE isolators fitted according to the weight of the component used. Time to refresh these with the M3X2 variant which has a cosmetic change to the profile.
Brand new speaker. Cartons damaged during delivery; speakers opened and checked to be visually perfect, and briefly played to confirmed to be electronically perfect. Hence reduction in price offered.
Avalon steel cones and manual, no crates. One owner from new, purchased in 2010. One of the best Avalon speaker designs and often used by US reviewers as their reference speaker. The classic Avalon sound of a very wide and deep soundstage, fast extended bass without being overpowering and false. Very natural high frequencies due to the diamond tweeter. A truly high-end speaker at an exceptional price.
Solid maple frame with original curved edge profile design. Usable surface area 515 x 465 mm/maple veneer. One owner from new. Designed to be used as amplifier supports. Since the demise of Finite Elemente these are now rare items. For use with high-end electronic components to reduce the noise floor and decouple from the floor.
Original cartons and manual. One owner from new, purchased in 2017. Customer downsizing. A superb omni-directional speaker designed to be played at the wall boundary. The white finish would fit well into a contemporary styled room.
Original carton, manual and remote control. Purchased 2008, one owner from new. Pioneer transport mechanism modified by Goldmund to include CNC solid aluminium tray. High quality, solid engineered case to add mass damping and rigidity.
Original packaging and manual. One owner from new, purchased in 2015. RCA connectors are Furutech Flux RCAs which were an additional cost at the time of purchase. Customer upgrading to Uno-S. One of the best sounding signal cables on the market today. Ultra linear and wide bandwidth, fast response, capable of delivering large sound stages without any hint of compression. No solder used in the construction, only cold welding.
No original cartons. One owner from new, purchased in 2013. Has 8 UK outlets and captive Audience power cord NAC3FCA with UK plug.
No packaging. One owner from new, purchased in 2014.
No packaging. One owner from new, purchased in 2014.
No packaging. One owner from new, purchased in 2014. 2 pieces available
Solid maple frame with the original curved edge profile design. Top level is a Heavy Duty version that has extra Cerapuc components to support up to 120 kg. Usable surface area 515 x 465 mm/maple veneer. No original cartons.. One owner from new. Used as amplifier supports. Since the demise of Finite Elemente these are now rare items. For use with high-end electronic components to reduce the noise floor and decouple from the floor. Fitted with 4 Cerabase Classic to enhance performance which was an optional extra at the time of purchase.
Original carton and presentation pouch. One owner from new, purchased in 2014.
Original carton and manual. One owner from new, purchased in 2014. A chance to buy this well respected power cord cable at an attractive price.
No manual or original cartons. Two owners from new: originally purchased 2005; current owner purchased them in 2010. Includes AC/Battery BAM (Bass Augmented Module). Optional David Berning valve BAM available at additional cost of £750; only 3/4 of these made. Two way floorstanding design using Dynaudio D330 Esotar tweeter and proprietary high mass edition of ScanSpeak carbon fibre woofer. Claimed frequency response 33Hz -22kHz; with BAM extended to 30Hz. Sensitivity 89dB; nominal 8 ohm impedance with 6.5 ohm minimum.
Manual, original carton. 8 grounded UK outlets. 1 set of 4 unswitched, 1 set of 4 switched; two Powerlink captive power cords. 3 outlets dedicated for digital and video compnents to protect other components from digital noise. Effectively isolates components, suppresses mains noise, and modulation distortion without the use of transformers which limit current capability and add their own distortions. To position RF filtering switch
Manual, original carton, remote control. One owner, purchased from us 11/2002 and still looks the same as when first installed. Recently re-valved with less than 250 hours use since then. High quality component count and build quality. Typical conrad-johnson sound from one of their finer early designs; large and deep sound stage, extremely elegant sound without much euphony or additional warmth.
Manual, original carton. One owner, purchased from us 11/2003 and looks the same as when first installed. High quality component count and build quality. Typical conrad-johnsound; large and deep sound stage, extremely elegant sound without much euphony or additional warmth. Recently re-valved with KT120s and had no more than 250 hours use since then.
Solid maple frame with more recent square edge profile design. Usable surface area 515 x 465 mm/maple veneer. No original cartons.. One owner from new. Used as amplifier supports. Since the demise of Finite Elemente these are now rare items. For use with high-end electronic components to reduce the noise floor and decouple from the floor.
Manual, original carton, remote control. One owner, purchased from us 10/2010. High quality component count and build quality. Typical conrad-johnson sound; large and deep sound stage, extremely elegant sound without much euphony or additional warmth.
Manual, plinths, seperate crossovers with cables, no boxes. One owner from new, purchased ex-demonstration 2012. External cross-overs. A very fine example of this highly regarded loudspeaker design. Photos available.
Manual, original carton. One owner from new, purchased 2009. Typical conrad-johnson sound based on 6550 tubes; large and deep soundstage, very elegant valve sound without any euphony or warmth. One of the most natural sounding valve amplifiers. An ideal match with the cj CT5 or ET2 pre-amplifiers.
Original wooden crate for SXR-1719-1V and original carton for M3-1719 isolation base. Isolation Base fitted with GREEN isolators supporting 13 - 27 kg. One owner from new, originally sold by us approximately 4 years ago. Customer upgrading to SXR-1921 module. Used as amplifier support to obtain the lowest noise floor by eliminating structure borne feedback of unwanted resonances. HRS are acknowledged to be the world leaders in equipment supports that reduce electronic noise levels by up to -25dB.
Manual, original carton. One owner from new, purchased mid 2016. The MAX version, now deleted, was a model above the TEA 2SE model. Typical conrad-johnson sound; large soundstage, very elegant valve sound without any euphony or additional warmth.This is the High Gain vesrion - 55dB gain - suitable for a wide range of moving coils cartridges.
Original carton. One owner from new, originally sold by us. Customer upgraded connectors to CF-102 carbonfibre/steel RCAs.
Purchased new 2007. one owners since new. A tall slim pyramid shaped model from this famous manufacturer which has a small footprint. A superb 3-dimensional, sound with deep and wide soundstage and excellent bass from a small enclosure, A refined sound: detailed without being etched; natural bass without exaggeration. Rythmn is fast and realistically portrayed. Excellent build quality and veneering.
Original carton and manual. Originally sold 12/2007, one owner since new. DAC board upgrades by Chord in 05/09 and clock board upgrade in 03/10. Has exactly the same sound quality as the Red Reference Mk III; does not have the USB input and the self opening door, otherwise identical. Commissioned sale - buyer pays seller direct. Delivery at cost.
Original wooden crates and manuals; all tools provided. 6 levels; intermediate level is adjustable at 30 mm intervals. Probably the best equipment support on the market with the lowest chassis noise capability. Suitable for the highest level of audio components. The burl walnut enhances the appearance and veneered to a high level of excellence. A rare opportunity to by this reference level equipment support at an attractive price. No isolation bases included. Some M3X-1921 bases could be available at extra cost. Delivery by quotation.
Original manual and carton. 1 owner since new, originally sold by us. Genuine UK transformers for 240+ volts, not European 220-230 volts. Superbly 3 dimensional and dynamic sound from this highly respected US solid state amplifier manufacturer. Transparent, detailed and extremely fast sound. Excellent build quality and reliability.